One is for a digital only tuner and the other is for a hybrid (analog/digital combo).
If you purchased and installed a tuner from msi in the usa the only one that was offered that I am aware of was the hybrid. The drivers on the website I am pretty sure are the same version that is on the CD shipped with your tuner. They have not been updated.
-
[email protected] Company Representative
-
thanks for clearing things up!
-
I can't find the serial number so that i can register it .... can anyone tell me where exactly can i find it ... i know it is under the barcode but i can't find the bar code ....
-
where did you buy it from
-
[email protected] Company Representative
-
Hi everyone,
I just got an MSI GX620, and I am pleased with it except for one BIG issue: the DVD burner is complete rubbish. It's the Optiarc AD-7560S with SX01 firmware. I simply cannot get it to burn DVDs properly, it always produces coasters around the 90% burn mark with Alcohol 120%/IMGBurn, etc. The choice of program used for burning really doesn't matter, it stops burning randomly close to the end of the disc burn.
For background, I had an Asus F3SV with the HL-DT-ST GSA-T20L drive and it was BULLETPROOF. It burned hundreds of the same blank media as I am using right now with NO problems whatsoever.
I am willing to swap out the drive, but then I learned that this computer uses a SATA motherboard connector. I have searched Google till I went blue in the face, but I haven't found many SATA slimline burners except for an Intel one, and the LG CT10N, which has BD read support, and is really expensive. My options now:
1) I still have my beloved T20L, which is IDE. Is there ANY way of adapting the IDE drive to fit the SATA connector on the motherboard? Will this work? Has it been done?
2) Buy a new, good drive...I don't need BD read support, so the CT10N is a waste of money. Is there a GOOD, RELIABLE, BULLETPROOF DVD burner that is both slimline and SATA??? There really don't seem to be many around for some reason, despite the fact that SATA is replacing IDE as the connector of choice on the new laptop motherboards.
Thanks for your help...this issue is really driving me up the wall, since I burn lots of discs and now I can't even burn 1 without problems.
SNB -
i have 7 of these drives in misc notebooks and all work perfect.. what media are you using
-
[email protected] Company Representative
You probably have a hardware failure with the optical drive. These drives work perfectly. If you have a GX620 pre-configured system I would suggest calling msi and setup an rma for a replacement drive. -
This might be a good option, but I can't go without my laptop, so I will see if they will take just the drive back. The service centre is in Toronto, I am further east in Kingston.
Regarding the previous poster's question, it's good to see that your experience has been very positive. I use Fujifilm DVDs (RITEK RIDATA), Verbatim CDs (CMC) and Memorex DVD DLs, all of which worked flawlessly multiple times with the GSA-T20L. Plus, Alcohol 120% shows this drive as "0:1" which I believe means it is unable to make identical copies of some discs. I could be wrong.
SNB -
I can't play CDs on my laptop ... DVDs work just fine but the CDs won't ... can anyone help?
-
Hello,
I have been lurking around here for a while now. I have a GX620 for about 4 months now. I noticed someone had put a 3870 Mobility in a GX720. How hard would it be to upgrade my 9600m to a 3870 Mobility? I have all the parts here to do the upgrade and I am going to try it. I even have copper to change the heatsink. What I am wondering is will this fit. I guess I will not know until I give it a try. I will keep you posted on the progress when I start this project.
Thank you,
William. -
It should fit just fine, not to be harsh, but several people say they will be back and never do. Hope it works.
-
Ok,
I managed to get this project up and running. I did a benchmark with alittle overclock to the cpu and gpu. It did not run hot. It stayed at 76c through the test. The 9600m feels like an IGP compared to the Mobility 3870. I will do more tests when I come home from work.
This was done on an external monitor. -
hows about some pictures of the graphics card in the gx620.
-
where is everyone getting these cards from arghhh
-
I dont know about them but I will have one Tomorrow evening... Just one though.. I have someone interested but if they dont buy it I will let you know....
-
where did you get it? and yes please let me know thanks
-
I am getting it from one of my customers, He had 2 and the crossfore cable but will only sell me the one card.. It was replaced by alienware like 2 monthes ago so it is like new.. I will let you know.. Thanks..
-
Hy everyone!
I have a gx620 but i suck with the aspm when on battery.
The pcie slot is 1x on battery and i can't play or watch an HD vid with purevideo.
How can i disable the aspm? -
-
I couldn't find info on this, the PM45 chipset in the gx620 says that it supports ddr3, even though it comes with ddr2.
Will ddr3 fit/work in the gx620, and is it a viable upgrade?
Thanks
-edit
Looks like it will not fit. -
No it will not fit, the PM45 supports DDR2 and DDR3 depending on what it comes with. The GX620 only uses DDR2.
-
Hello folks. I've had my msi gx620 for a few months now. About two months ago, I noticed that after waking it up from being idle that the wireless was not functioning. The light on both the front of the notebook and the touch sensitive toggle were lit, but Windows said the wireless adapter was turned off. I simply reset the notebook and it worked after that.
However, today it happened again. I was unable to get it to work after a restart and now I'm kind of confused.
Windows diagnostics says the adapter is turned off, which it isn't according to the lights. I've got another pair of laptops on the wireless network, so I know that the signal itself isn't the issue. Currently, the gx620 is on a wired connection that works just fine.
My experience with laptops is pretty limited. If the wireless card is, in fact, busted somehow, can I just pop the thing open and install another like I would in a PC? -
-
Thanks. I'll keep fiddling with it (I heard something about sending it into hibernate mode) before I buy one.
[edit] Yep, putting it into and out of hibernate did the trick. Go figure. -
as for the wireless problem, glad you figured it out : ) -
-
I need to contact an RMA but my problem is that i can't submit it without a BIOS number anyone know where I can find it? (detailed instructions because I'm not very computer savvy)
-
-
-
what heatsink did you need and do you have it also how much for both?
-
Do you think this laptop can run well some games after 2 years? I just bought this one last mid oct.
-
-
-
Hello everybody I need some help, the fact is that I format my lap GX620 and install the win 7 pro retail edition but I lost the on screen indicators for the touch sensitive buttons like WIFI, BLUETOOTH, WEBCAM, ECO, TURBO, and FN keys like Brightness, volume, etc.... There is a way that i can restore it??? Please i would really appreciate your help
-
Also I have some expertise problem trying to install the drivers from the msi site http://www.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=135&prod_no=1529, i downloaded but i dont know what to do next, there are files like .sys... Somebody could make a guide to install those drivers... Thank you
-
-
hi, i want to update to windows 7 however before i do this i want to make sure i dont lose the copy of vista that i got with my gx620, if i use MSI BurnRecovery will this do the job?
-
or macrium reflect which is free and works awesome
-
Hey anyone knows something about the keyboard on screen indicators (volume, brightness, etc)... I cant find anything
-
Hey I find a way to re-activate the on-screen indicators and the ECO/Turbo Mode, the solution is really easy indeed just go to the MSI web look for your notebook and click in utilities, download and install system control manager and thats all
-
-
I was wondering, what is the best notebook cooler for this laptop? or what cooler are you guys using for yours
-
i use the nc1000 but its like an inch small but still works for me! keeps temps lower.
-
Hello Everyone!
I'm a new owner of an old GX620, and I have a question...
Is there anything we can do about the videocard bottleneck in battery mode?
Thanks -
Quick question -- My T9300 is reporting -21C. How do I fix that? I think my BSODs might be due to heat, I've been getting a ton of them.
-
where to buy parts for this laptop in EUor someone sending parts to BiH(Bosnia)
.
if anyone knows please send mail to [email protected] -
moral hazard Notebook Nobel Laureate
-
hello guys, i have bued this notebook for m sister
9600m gt are upgradable? 9600m gt are overclockable?
for good performance/temperature, wich processor i can put? t9400/t9600/t9800/t9900/x9100? -
moral hazard Notebook Nobel Laureate
If you get the heatsink from a GT627 or GT628 (rkcomputer has them) then you can upgrade the GPU to an MXM 2.1 type III/HE card.
A 9800m GS and 160m should be perfect.
I went from a 9800m GS to a 9600m GT and then to an FX 3700M.
The 3700m is going to be very hot, so you should probably aim for something like a GTX 260m or GTX 280m.
With the CPU, you can overclock it 15-20% with the turbo button (depends on the bios version). You can also use setFSB to overclock and even setPLL:
http://forum.notebookreview.com/har...clocking-methods-examples-84.html#post7153216
I can try to help you with setpll.
All of the CPUs you have listed should work fine.
Other GPU options:
ATI mobility 3870 (need to cut the heatsink a bit to fit).
ATI mobility 4850 (need to cut the heatsink a bit to fit).
9800m GTX
9800m GT
9800m GTS
8800m GTX
FX 2800M
FX 3600M
You can overclock the 9600m GT. Try using MSI afterburner or mod the vbios with nibitor.
Msi Gx620
Discussion in 'MSI' started by taigech, Aug 2, 2008.