The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.

M6600 Owner's Review - Warning - Large pics - Personal Opinions

Discussion in 'Dell Latitude, Vostro, and Precision' started by Bokeh, Jul 26, 2011.

Thread Status:
Not open for further replies.
  1. slimpower

    slimpower Notebook Evangelist

    Reputations:
    17
    Messages:
    327
    Likes Received:
    32
    Trophy Points:
    41
    Hi bryon123 - I use that RAM and it is fine, in fact I am very pleased with it. Be sure to run a memtest+ when you first get it to make sure they are all working properly etc.

    With RAM, the CL is one of the most important things to consider and the RAM you mention is CL9 which is fine. Enjoy.
     
  2. robotti80

    robotti80 Notebook Consultant

    Reputations:
    47
    Messages:
    160
    Likes Received:
    0
    Trophy Points:
    30
    The PC3 number indicates the clock speed the RAM modules are max. clocked with:
    PC3-8500 = 1066 MHz
    PC3-10600 = 1333 MHz
    PC3-12800 = 1666 MHz
    PC3-14900 = 1866 MHz

    DDR3 SDRAM - Wikipedia, the free encyclopedia
     
  3. pterodactilo

    pterodactilo Notebook Consultant

    Reputations:
    11
    Messages:
    225
    Likes Received:
    7
    Trophy Points:
    31
    Any chances of M4600/6600 being compatible with Ivy Bridge?
     
  4. bryon123

    bryon123 Newbie

    Reputations:
    0
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    5
    Thankyou slim, when the ram gets here i will ask you how to do that.
     
  5. jackkicker

    jackkicker Notebook Enthusiast

    Reputations:
    0
    Messages:
    31
    Likes Received:
    0
    Trophy Points:
    15
    I've read all 25 pages of this thread but I'm still not quite sure what hard drive would be better for the mpcie slot used for the mSata drive.

    If I order the "128GB (SATA3) Mobility Solid State Drive" for +$100 from Dell.ca will it be a mSata SDD? Or should I order a MyDigital BulletProof 128G or another model like a Renice? I'd like to be able to boot from it..

    EDIT: I confirm that the "128GB (SATA3) Mobility Solid State Drive" for +$100 from Dell.ca is a standard 2.5" and WON'T fit in the mSATA port. I'll order a MyDigital BulletProof since it seems to be fast and reliable..
     
  6. Bokeh

    Bokeh Notebook Deity

    Reputations:
    1,330
    Messages:
    1,777
    Likes Received:
    259
    Trophy Points:
    101
    The Intel ssdmaemc080g2 , otherwise known as the "Intel Solid-State Drive 310 Series - Solid state drive - 80 GB - internal - PCI Express Mini Card" works well and I have personally tested it. It is not quite as fast as the Samsung drive that Dell sells the M6600 with, but it is faster than a platter drive. It is faster than 2 platter drives in Raid 0.

    Micron is now shipping the C400 mSATA SSD at 128MB. It seems to be a very good performer.

    Intel is getting ready to roll out the 330 Series of SSD drives. Maybe an mSATA will be among them.
     
  7. happybath

    happybath Newbie

    Reputations:
    0
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    5
    Nice pictures of the insides; I will have to return to this when I do my upgrades.
     
  8. MEJazz

    MEJazz Notebook Enthusiast

    Reputations:
    0
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    5
    I have ordered a refurb m6600 (2820qm/8900m/500GB/8G/Blu-ray) and have one question (think i read most pages here but can't find answer to this): If i get an mSATA SSD (Kingston SSDNow mS100 64GB mSATA Internal Solid State Drive SMS100S2/64G) and put it in, would i be able to use it as my boot/apps drive?
     
  9. tommyxv

    tommyxv Notebook Evangelist

    Reputations:
    80
    Messages:
    473
    Likes Received:
    13
    Trophy Points:
    31
    Yes you can. You can use any of the the 3 hard drives as the primary boot drive. I got that info from reading this entire thread so I cannot take credit for that information. :) 64GB is going to be very close for Windows and your apps. Formatted capacity will be in the 55GB range before you install anything. Hope you do not have many apps. ;) I would go with a 128GB if it were me.
     
  10. MEJazz

    MEJazz Notebook Enthusiast

    Reputations:
    0
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    5
    That's great! Any tips on how can i easily "clone" my factory boot drive to mSATA so that i don't have to install OS/drivers manually?
     
Loading...
Thread Status:
Not open for further replies.

Share This Page