Why would I want to use 2-3 year old OC utility? Whats your point exactly?
-
-
im interesting if it works mean recognize that card
-
but you dont have that card and I dont intend to OC just yet so whats your point I still didnt get it
-
that's way i ask if someone can check if it works
-
yea and if it works? what's the outcome?
to know if you can OC with it? You can use any other tool, OC settings will be applied just the same to the card except the GUI will be different but commands are no different. I think You have 6990m , so in theory if it works for you on 6990m it should work on 7970m too -
im know that it works for 6990m
im usually use it to undervolt from 0900 to 0800 - know any similar tool ? -
What is the gain? 10-15min overall more battery life or temperature control? Or unnecessary issues while gaming? Explain
-
undervolting + force clock ~ stable idle temperature that's important to me to use slowest fan speed = quiet MSI
without that usually gpu clocks variate and with that temp goes +60 and fan runs faster -
my 7970m idles 35c if very little use of the laptop, 50c max on heavy multitasking and etc (not gaming) so if you go 7970m your laptop will be quiet automatically without need use of ATT
-
Thanks for all that work and info ultra. Going to do the same to mine and post results here.
-
Throttlestop 5.0 has been originally designed to work with Ivy Bridge chipset/CPU so I do advise you guys to use the 4.0 version.
I also do tick EIST and C1E. -
-
Modded BenchmarK3D
I have tried ThrotteStop 5.0 before and 4.0 now and seen no difference in the effect, so I may as well say any version will do as it worked just exactly the same for me, but you must use it along and and deselect BD PROCHOT option , just check my screenshot from earlier
http://i47.tinypic.com/1zzj5w8.jpg -
Ultra in the winzip file you linked which option do i install lol? there are loads of options?
-
#1 EXTRACT THE FILE
#2 RUN SETUP
#3 CHOSE CUSTOM INSTALL
#4 DESELECT CATALYST CONTROL CENTRE
#5 DESELECT APP PROFILES
#6 KEPP ALL OTHER OPTIONS SELECTED
#7 INSALL
#8 When prompted to install unsigned driver - Authorise and accept Installation
Reboot
Enjoy -
-
application profiles
SDK MUST BE INSTALLED -
-
ok my bad ignore this option , then only CCC not to be installed
-
Still for me. If anything its actually worse.
-
using throttlestop with advised options?
-
Throttlesrop for gpu?
-
its for your laptop mobo power management
-
Ok will try.
How do you get voltage settings?
Meh making me angry now. All i dis was a dresh install of win 7 and my gpu goes to pot. -
Whatsup, what happened , explain?
I ran MSI Kombustor benchmark to monitor voltage and see some performance, you can also use GPU Shark to monitor more stuff from GPU
While running game and etc did you ran MSI aferburner and did you check if clocks switched from 300MHZ to 850MHz ? -
Its a utilisation issue. Even if i overclock the gpu it doesn't stay at 100% utilisation. It does in tests but not in games. Wow for instance. Facing one direction 100% gpu 97 fps. Turn around 36% gpu 13 fps.
But before clean install on samsung 830 it didnt do it. -
for making things go well forget about OC first
make things go well with stock speeds etc 850 GPU 1200 RaM
try set your GPU 849MHz and leave ram intact and see if it hits full GPU utilization -
Ok will do. But in bed now so will post tomorrow.
-
There have been many small updates since version 4.00 so use the latest version no matter what CPU model you have. -
Thanks for the clarification!
-
Mmmmh.... what about the fact HWiNFO 64 and others report UDMA6/UATA133 controller but UDMA5/UATA100 in use as default on GX660?
Is there an advanced BIOS (CTRL+ALT+INS) setting to change? -
Ultra i fixes it. Was weird i overclocked the gpu a tiny bit like 855 and mem 1210 and installed latest driver and its fine. Sits at 100fps now 100% utilisation.
-
There are loads settings to play with but since it may be firmware hard locked you may not be able to fiddle with these settings, check my fully unlocked BIOS'es for GX660 and GX660R maybe it will be any use for you. im also thinking that the 1st gen i7 is what limiting SATA speed to SATA2 as you mention, even tho board may support SATA3 CPU doesnt allow this to happen
Glad to know now wait till you get the 940XM you will see the good BUMP UP in performance from your i5 cpu you used MOD driver or standard 12.10 WHQL ? -
Standard. Yes cant wait for cpu. Should arrive today!
-
make 3dmark 11 and 3dmark vantage benchmarks with system working at its best right now so you can make nice comparison after install 940XM!
Take screenshots and post up here
WOOOOW
This is my #6'th 7970m and I have never in my past experience have seen so low temperatures! 26-27c iddle if not doing absolutely nothing.... IC DIAMOND24 compound...
-
Take it back. Although fps is miles better gpu load is still only max 55%.
-
^^^^ Use throttlestop!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! and settings I have advised!
-
What settings mate?
-
oh stop
please read few pages backwARDS -
Yea i know but you have voltage showing on yours and i cant get that.
Nevermind. I see thats for tour cpu not gpu. My bad.
Even using your settings still the same. Must be wow. Gonna tru 3d mark
Is it my cpu limiting the gpu usage?
Todays Score
SCORE
P4420 3DMarks
GRAPHICS SCORE
5528
PHYSICS SCORE
2784
COMBINED SCORE
2727
Beta 12.11 driver results
SCORE
P4413 3DMarks
GRAPHICS SCORE
5516
PHYSICS SCORE
2829
COMBINED SCORE
2660 -
Hi, i have a MSI GX660 non R. whith a 5870M gpu. In the 3dmark 2011 i make 2400-2500 point whith turbo key activate em clocks stok @700/1000.
But in the page of futuremark whith the score apears wrong clock the gpu @405/1000. I dont know if the results are good or not.
Any idea?
Sorry my bad english
Regards fron Brazil. -
12.11 Beta 7 drivers No CCC installed
SCORE
P4397 3DMarks
GRAPHICS SCORE
5489
PHYSICS SCORE
2823
COMBINED SCORE
2656
Exactly the same as above but with Crucial Vengence DDR3 removed and replaced with standard corsair 1066 ddr3
SCORE
P4708 3DMarks
GRAPHICS SCORE
6285
PHYSICS SCORE
2738
COMBINED SCORE
2614
Lookd like the ram was borking it up! -
^^^ I told you rather go with 1333 MHz Kingston 12GB Kit best bang for the money you can find for GX660 platform
Looks like CPU is holding back something alright, did you try 3Dmark vantage yet?
browsed down these were some of my bench results from 940xm + 7970m from past
http://i50.tinypic.com/nvcrjo.jpg
http://i47.tinypic.com/23jpx93.jpg -
Yeah beat result is 12.11 beta 7 no CCC ups on version 667 ram. Both 3d mark and wow much better.
Deffo cpu doing somthing. Cpu score was higher with the 890 mhz ram. -
Well, when you get XM cpu I suggest you try that RAM of yours (1866MHz) again and see the comparison and speed that ram runs. By the way did you get deep enough trough bios settings to find places where you need to set RAM timing to AUTO instead of factory 1066?
-
I have a Medion X6811 (MD 97682) which I believe is a rebadged MSI GX660.
I need a new power jack and can't find any information on-line, I notice Fordy 2001 had the same problem but I can't find any way of pm'ing him on this forum.
I also need to replace the plug on the power brick, ebay sellers are selling 65w adaptors which they say are compatible but my brick is rated at 150w, will a 65w adaptor work?
Any help on finding a part number for the power jack would be appreciated. -
NEW 12.11 BETA_11 7900 MOD Driver is now available!
AMD Catalyst 12.11 Beta 11 9.01.8 – 7900 MOD – BenchmarK3D -
Hi,
I'm a proud owner of a GX660R-646UK, I've upgraded the RAM to 10GB and swapped out one of the hard drives for an SSD, I'm starting to want more graphics power and am looking to upgrade my GPU as a result, I've read a lot of threads on here and elsewhere about the 2 or 3 pipes issue (i'll have to open my laptop up later to check which I have). I like the sound of my laptop being able to have a 7970m shoe horned in with some light dremel work which i'd be happy doing. As far as as I understand it I'd need to upgrade my PSU and GPU at the same time.
My question is, am I right in assuming the above is true, and if so where is the best priced place to find the above in the UK.
Thanks in Advance,
JT -
Hi SkeletalBOB
There are no issues with 2 or 3 pipe heatsinks, but of course there will be few degree Celsius advantage with 3pipe heatsink
Yes You need to upgrade your PSU to 180W prior getting new GPU and CPU
laptop is great machine and takes upgrades easy enough.
SSD as primary boot drive is great choice, so is RAM upgrade but you may be better off with sticking 3 x 4GB Same size same make same speed RAM sticks for finest performance. (I recommend Kingston 3 x 4 GB 1333MHz CL9 RAM, cheap on ebay)
7970m is the best GPU that you can get and give to our laptop as of date, so yes this is very good choice too but dont forget upgrading your CPU to something like 920xm and or 940xm which will all benefit when new GPU is combined in the upgrade.
For sourcing GPU i suggest checking market place here there are few coming up every now and then at great prices, but you must buy DELL OEM version GPU, and ask seller to check if 3D Clocks voltage is 1.05v (little tip for saving yourself hassle of instability and likes)
For CPU it doesnt really matter if its ES, QS or OEM, of course best choice will be QS and OEM, but OEM may cos you double the QS price, and QS is just few % more expensive than ES in some cases (also check NBR market place here, or ebay)
Alot people do upgrade LCD for better viewing angles and colour gamut and contrast, so if you will be shopping at that its a hard one because good screens are just few models out there and even more difficult to find genuine seller having one as likes ebay and amazon may sell one with the tag of what you look for but in reality you get some Chinese crap which is only a replacement for the tag that you paid for in the title,so be aware of that
The LCDs you want is:
Antiglare version: B156HW01 V4 Datasheet download - Panelook.com
Glosy version: B156HW01 V7 Datasheet download - Panelook.com -
~GX660(R) Owner's Lounge~
Discussion in 'MSI Reviews & Owners' Lounges' started by Affirmative Inaction, Oct 10, 2010.