The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.

How to upgrade RAM in E6400

Discussion in 'Dell Latitude, Vostro, and Precision' started by hkchewy, Jan 30, 2009.

Thread Status:
Not open for further replies.
  1. hkchewy

    hkchewy Notebook Enthusiast

    Reputations:
    0
    Messages:
    35
    Likes Received:
    0
    Trophy Points:
    15
    Hi

    Please apologize to my ignorance, I seems can't figure out how to open my laptop. I unscrew 3 screws from the bottom of the laptop; and notice 2 of the screws is to secure the HDD, so it seems there is only one main screw to hold the bottom. After I unscrew everything, I try to slide down away from the battery, it just doesn't open, I don't want to force anything, am I doing it right?

    Thank you
     
  2. yellowlt4

    yellowlt4 Notebook Consultant

    Reputations:
    8
    Messages:
    198
    Likes Received:
    0
    Trophy Points:
    30
    Yes, there is one screw and then the bottom slides away from the battery and drops off. At that point you will see the stacked memory slots.
     
  3. David

    David NBR Random Reviewer NBR Reviewer

    Reputations:
    7,515
    Messages:
    8,733
    Likes Received:
    7
    Trophy Points:
    206
  4. hkchewy

    hkchewy Notebook Enthusiast

    Reputations:
    0
    Messages:
    35
    Likes Received:
    0
    Trophy Points:
    15
    Thanks for your help
     
  5. allfiredup

    allfiredup Notebook Virtuoso

    Reputations:
    1,482
    Messages:
    3,209
    Likes Received:
    17
    Trophy Points:
    106
    Has anyone else noticed Dell's apparent move to making the entire bottom panel removable instead of various small access panels for upgradeable parts? I was amazed it only has a single screw on my E6400...but it is magnesium alloy. The Studio 15's plastic bottom panel has 7 different screws to fasten it into place. And when it is removed, the Studio quivers like Jell-o...scary!
     
  6. David

    David NBR Random Reviewer NBR Reviewer

    Reputations:
    7,515
    Messages:
    8,733
    Likes Received:
    7
    Trophy Points:
    206
    The bottom panel is actually plastic. The magnesium alloy is found in the chassis and not used on any of the E6400's exterior casing.
    Nevertheless, the single screw and single back panel is impressive and certainly very convenient for people whom likes to tweak and make modifications on their laptops :)
     
  7. yellowlt4

    yellowlt4 Notebook Consultant

    Reputations:
    8
    Messages:
    198
    Likes Received:
    0
    Trophy Points:
    30
    The bootom door on my E6400 is NOT plastic, It is Magnesium alloy. The LCD top on my E6400 is also Magnesium alloy. The only plastic I can find is in the palm rest and the few other small plastic peices like the hinge covers.
     
  8. allfiredup

    allfiredup Notebook Virtuoso

    Reputations:
    1,482
    Messages:
    3,209
    Likes Received:
    17
    Trophy Points:
    106
    I honestly can't tell what material is used for the bottom cover, but it feels oddly metal-like....could be a really good paint/finish on some heavy duty (but lightweight) plastic?

    In any case, the magnesium alloy case/frame makes the E6400 feel rock-solid! Even when the bottom cover is removed and you pick the machine up (upside-down, of course), it doesn't feel any less sturdy. The Studio 15 without it's plastic bottom cover (and the seven screws that accompany it) feels like you could twist the entire thing if you got a good grip on each side with both hands....or snap it like a twig!

    Long story, short= Latitude GOOD!
     
Loading...
Thread Status:
Not open for further replies.

Share This Page