The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.

E6430 cannot turn on

Discussion in 'Dell Latitude, Vostro, and Precision' started by pakthedude, Jul 24, 2018.

Thread Status:
Not open for further replies.
  1. pakthedude

    pakthedude Newbie

    Reputations:
    0
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    5
    I took out my E6430 with dGPU from storage (battery was left in the laptop, last used 6 months ago).
    I plugged a 90W adaptor and booted to Windows 7 desktop. I left it as it is and 5 minute later it go blank with no led. It could not turn back on. I left it on my bed and have a unpowered laptop cooler. Overheating shouldn't be the case and the cooler is regularly dusted.
    I did the 30sec power discharge method without battery and plugging the cable.

    I switched around 2 working charger, the same thing happens. The Led on the brick /cable turned off the moment I plug in or when switch on the power outlet. When I press the power button, nothing happens. No burning smell was present.

    I've reseat the rams, have 1 ram only, remove/replug cmos battery cable, replug DC connector cable.

    The laptop is out of warrenty. Is there any solution or fix for this?
     
    pakthedude, Jul 24, 2018
    #1
Thread Status:
Not open for further replies.

Share This Page