The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.

e6400 physical problem\lost

Discussion in 'Dell Latitude, Vostro, and Precision' started by entrecote, May 29, 2009.

Thread Status:
Not open for further replies.
  1. entrecote

    entrecote Notebook Enthusiast

    Reputations:
    0
    Messages:
    25
    Likes Received:
    0
    Trophy Points:
    5
    hi all
    tried/searched card reader slot (i want to enter SD card) and pushed/pulled some slots. after removing and re-entring the DD drive, i pushed at the right some small square called pc or something, and now it doesnt entered back, by pushing it it pulls out something unknown looking like border of two squares

    how do i re-inserting it and if/how i can read from SD card?

    attached pictures
    http://img132.imageshack.us/my.php?image=dsc005382.jpg
    http://img24.imageshack.us/my.php?image=dsc005392.jpg
     
  2. poojagupta

    poojagupta Notebook Enthusiast

    Reputations:
    0
    Messages:
    25
    Likes Received:
    0
    Trophy Points:
    5
    Yeah I noticed it is hard to put back in the first few times. push the card out and remove it. push the lever back in so that it is flush with the system. now put the card back in. if it doesn't want to go in, try jiggling it a little.

    that's how I do it but it seems counter intuitive. give it a try
     
  3. krysimlade

    krysimlade Newbie

    Reputations:
    9
    Messages:
    9
    Likes Received:
    1
    Trophy Points:
    6
    Sure, poojagupta is right ! It's xpress card slot.
     
  4. weirdo81622

    weirdo81622 Notebook Evangelist

    Reputations:
    86
    Messages:
    619
    Likes Received:
    0
    Trophy Points:
    30
    It doesn't really matter what it is. There are some models equipped with a PC card, some equpped with an Expresscard.

    It does go back. You'll just have to press firmly (in the process, the blank filler card will come out). You can pull out the blank card. Then, pre ss the small black square thing fully in until it clicks. Then, just slide in the big black rectangular filler in.
     
Thread Status:
Not open for further replies.

Share This Page