The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.

Log in or Sign up

Dell Precision M4700 and Cintiq 13hd color calibration problem

Discussion in 'Dell Latitude, Vostro, and Precision' started by appomo, Dec 3, 2013.

Thread Status:: Not open for further replies.

appomo Notebook Guru

Reputations:

15

Messages:

55

Likes Received:

0

Trophy Points:

15

i have a cintiq m4700 with a full rgb diaply which need the PremierColor Software

now i got a cintiq 13hd which comes with a Wacom Display Setting Software too and i have problems to get the 75% aRGB(which wacom lists in theire specs) out of the device with the Spyder4pro tool.

that is my current result

sRGB 93%
NTSC 69%
aRGB 72%

someone here with the same devices and tipps about how i should set it up to get the 75%?
the premierecolor default setting for the cintiq is
brightness 90
contrast 50
red 50
green50
blue50

the wacom default setting is
brightness 50
cibtrast 50
6500K
red 44
green 45
blue 51

i think these two mix up together somehow so that i cant get the result i want...so when there is someone who can help me to get the 75% and with that hopefully a full 100% of sRGB feel free to post your solution or tipps

appomo, Dec 3, 2013

#1