The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.

Dell Latitude e6410

Discussion in 'Dell Latitude, Vostro, and Precision' started by Vesigoth, Jun 6, 2013.

Thread Status:
Not open for further replies.
  1. Vesigoth

    Vesigoth Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    Just replaced the motherboard on this laptop and now when I try to boot I get a message "Alert! CPU microcode update failed."
    to continue press F1 key
    to change setup option press F2
    to run onboard diagnostics press F5

    If I press F1 the system will not boot, if I press F5 it finds no other problems. I've not tried to change the setup options yet. Any thoughts or ideas will be appreciated.

    Thanks
     
  2. Commander Wolf

    Commander Wolf can i haz broadwell?

    Reputations:
    2,962
    Messages:
    8,231
    Likes Received:
    59
    Trophy Points:
    216
    Do you know what is the BIOS revision and what is the CPU on the board?
     
Loading...
Thread Status:
Not open for further replies.

Share This Page