The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.

Dell D810 Hard Drive Options

Discussion in 'Dell Latitude, Vostro, and Precision' started by Eunix, Jul 2, 2012.

Thread Status:
Not open for further replies.
  1. Eunix

    Eunix Notebook Enthusiast

    Reputations:
    0
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    5
    I have 3 Dell D810s still in regular rotation. Although I am not a Dell fanboy, I have to say that I love this model. That is why I have 3 of them and the screens are awesome!

    I would like to extend the life of them a little bit longer by adding a SSD and it appears that all of the SSDs that I see are SATA based.

    My questions are :

    Are there any EIDE based SSD?

    Is there an adapter that will let me use a SATA drive in my D810 ? (Something that will give me the blade adapter needed for Dell machines.)

    Thanks,

    Eunix
     
  2. Eunix

    Eunix Notebook Enthusiast

    Reputations:
    0
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    5
    I found some IDE SSDs but not in the capacity that is worth the cost. I may be able to fashion an adapter but I may have to custom build a drive caddy
     
  3. Commander Wolf

    Commander Wolf can i haz broadwell?

    Reputations:
    2,962
    Messages:
    8,231
    Likes Received:
    59
    Trophy Points:
    216
    If you don't need your optical drive, you can get caddies for the D-Bay that take SATA hard drives. You'll be limited by the max throughput of the IDE bus in sequential transfer, but you will still be able to take advantage of high random read/write speeds.
     
  4. oxygen

    oxygen Notebook Guru

    Reputations:
    0
    Messages:
    71
    Likes Received:
    1
    Trophy Points:
    15
    it's not worth the hassle. even convetional harddrives max out IDE quiet easily. you wont get any speed improvement from a ssd connected via ide.
     
  5. Eunix

    Eunix Notebook Enthusiast

    Reputations:
    0
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    5
    Thanks for the hints.
    I think the only feasible option would be to use the D-Bay and boot from SSD.
    The older IDE/SSD are not worth the cost.

    I would hate to give up the CD/DVD slot but I do have a docking station with a bay and expansion port.

    I may just leave it alone period as I am quite happy with the performance and longevity of these machines. It just seems a little sluggish at times when I put too much of a load on it and the boot time is a little slow.

    I just thought that if I could replace the primary drive with a SSD (120G) for a reasonable price, I could extend the functionality.

    In regards to the life of the machine.... I will use it until the wheels fall off!

    If I decide to go ahead with the project, I will let the group know and post some performance differences.

    Eunix
     
Loading...
Thread Status:
Not open for further replies.

Share This Page