The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    How to fix loose hinges on 530U4C

    Discussion in 'Samsung' started by littlestewie, Oct 9, 2016.

  1. littlestewie

    littlestewie Notebook Enthusiast

    Reputations:
    0
    Messages:
    21
    Likes Received:
    4
    Trophy Points:
    6
    I have a Samsung 5 series 53U4C laptop. Its hinges are loose, i want to fix it, i opened up the back panel tightened some screws on hinges but that didn't work.

    Is there any other way to fix this problem?
     
  2. John Ratsey

    John Ratsey Moderately inquisitive Super Moderator

    Reputations:
    7,197
    Messages:
    28,841
    Likes Received:
    2,165
    Trophy Points:
    581
    There is no way that I know of to tighten the hinges used on notebook computers. I would look on the 'bay and similar places for a set of hinges taken from a dismantled U4C or similar. However, you will probably have to remove the display bezel which might be glued in order to get to the screws fixing the hinges to the display.

    John
     
    littlestewie likes this.
  3. littlestewie

    littlestewie Notebook Enthusiast

    Reputations:
    0
    Messages:
    21
    Likes Received:
    4
    Trophy Points:
    6
    Well i took the risk and opened the bezel from the bottom a little bit so that i could access the hinges under the bezel, the screws on the hinges were loose. After tightening them the problem was gone. Good thing that i did no damage to the screen bezel.
     
    John Ratsey and Dannemand like this.