The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Need HELP !!!! Packard Bell LJ65 Power On Problem (Won't turn On)

    Discussion in 'Packard Bell' started by WGenius, Sep 19, 2013.

  1. WGenius

    WGenius Notebook Enthusiast

    Reputations:
    0
    Messages:
    17
    Likes Received:
    0
    Trophy Points:
    5
    Hi everyone, this notebook won't turn on,
    Took-off HDD/ODD from the start
    Checked the DC Power Jack (PJP1) => Good (Sure about it)
    Checked the Battery Connector (PJP2) => Good (it has voltage out)
    Reset the motherboard by desoldering the battery
    Reset Memory modules
    Changed The CPU (Even if the CPU is defective the motherboard Should power on and don't boot-Up)
    Checked the power board _connector_(JP45) with a multimeter and it has voltage.
    Tried to touch the two power switch leads of the power board connector to power on the motherboard like we do with desktop motherboards (BTW is it that possible with notebook motherboards :confused: !!! i've already tried it ;)) (to make sure if its the POWER BUTTON that causes the problem) but no luck
    I think the problem is the Power Board
    What do you say guys !!!!!!!!!!!!!!!!!!!!!!!!!!!!
    Please Help :( !!!!!!
    View attachment 102138 View attachment 102139
     
    WGenius, Sep 19, 2013
    #1
  2. WGenius

    WGenius Notebook Enthusiast

    Reputations:
    0
    Messages:
    17
    Likes Received:
    0
    Trophy Points:
    5
    Problem Solved, By baking the motherboard :rolleyes:
     
    WGenius, Sep 23, 2013
    #2