I want to make a cooler. Will you be effective?

Hello friends. I made a cooler design on the picture. Would that be effective?

 

That would radiate heat from the heatsink, but that heat would just stay in the chassis.

"GTX 1080 in a thinbook is fine" -Razer

 

Not sure how much difference those added heatsinks will make but if you want effective cooling, just leave off the bottom cover, install rubber feet on the chassis (taller feet for the back portion), and cool it with some fans. Cool air hitting your heatsinks will definitely drop temps.

One cheap way to do this is get a couple of 120mm 12V desktop fans powered by a 12V DC power adapter and mount them in one of those cheap Ikea plastic laptop stands. The whole thing can be accomplished for around 30 USD (depending on the fans you buy), but you will need to cut out the holes in the plastic stand which is easy if you have a large enough hole saw.

 

I don't see any difference.

 

adding more mass to heatsinks will slow it down from heating up. But from my experience, when it heats up, it's harder to take the heat away also. A heatsink and fins would be more effective if you could run more airflow on them. Spinning the fans faster and replacing the thermal compound with liquid metal applied on both sides works best.

 

You're basically referring to thermal mass. Some more general information can be found here and here.

 

if you aren't using theoptical disc drive I would add in another Fan/Sink combo there

 

Well, get some copper heatsinks use them instead of those black ones u used, and get some thin copper wires, round thim up to get them thick and try to connect the copper heatsink u intalled to the main heatsink, i did it to my clevo and got 9°c drop on both gpu and cpu.

 

You're dumping some heat into the bottom of the system/case so if you don't increase the airflow down there, you're not doing much. Pair that with a notebook cooler or at least put it on a well ventilated stand, and you'll see better results.