The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    networking cable distance

    Discussion in 'Networking and Wireless' started by lp33, Apr 12, 2006.

  1. lp33

    lp33 Notebook Consultant

    Reputations:
    0
    Messages:
    158
    Likes Received:
    0
    Trophy Points:
    30
    Man I've been out of the computer world too long. MY QUESTION is how long can my network cable be until it starts to lose signal or data or whatever? I'm using CAT5 cable, thanks.
     
  2. ZJChaser

    ZJChaser Notebook Consultant

    Reputations:
    2
    Messages:
    210
    Likes Received:
    0
    Trophy Points:
    30
    generally ~350ft is used as a rule.
     
  3. cvec7

    cvec7 Notebook Evangelist

    Reputations:
    16
    Messages:
    374
    Likes Received:
    0
    Trophy Points:
    30
    100 meters.
     
  4. skyflyer

    skyflyer Notebook Guru

    Reputations:
    50
    Messages:
    51
    Likes Received:
    0
    Trophy Points:
    15
    it all depends on your access method and the standard that you use. since you mentioned that you used cat 5 cable i presume its ethernet 100 base t. if so then the maximum cable length to the hub/switch is roughly about 100 meters but of course you wont run cable that long before signal is lost or if its a concern. minimum cable length is 0.6 meters. also using this method and standard you can have as much as 1,024 devices within the network.

    anyway consider using cat 5e its better and its faster.

    hope that helped.