Wireless only connects locally on home router

I am using an Acer Aspire 5720z, I cannot connect more than locally with my internal wireless card.. When i type in ipconfig /all this is what comes up


Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Windows\system32>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Cid-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection* 14:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Anchorfree HSS Adapter
Physical Address. . . . . . . . . : 00-FF-20-58-BC-D6
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Atheros AR5007EG Wireless Network Adapter

Physical Address. . . . . . . . . : 00-1C-26-A6-1A-2E
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet
Physical Address. . . . . . . . . : 00-1B-38-52-BE-A2
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::14c1:b5c2:c455:eb8a%8(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.12(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Tuesday, February 14, 2012 11:55:01 PM
Lease Expires . . . . . . . . . . : Wednesday, February 15, 2012 11:55:01 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 201332436
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter Local Area Connection* 6:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter Local Area Connection* 16:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 17:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::5efe:192.168.1.12%28(Preferred)
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Disabled

I'm not really sure what is wrong or what to do..

 

It's connected on your lan card, what happens if you try connecting to your wireless only?

 

It says its connected, but only locally.. It almost seems like something is missing

 

if you unplug the lan cable and connect using your wlan does it still happen?

 

Yes, and it calls it an unidentified network.. but it is named NETGEAR

 

I'm kinda navigating in the dark here, but i'll offer what little help i can.

First, disconnect from the network, remove the wireless network form the network and sharing center, power cycle your router and try connecting again.

Check your network configuration too, are you set to N only, mixed mode, etc.

You could also check if the encryption settings match on both the router and the wireless adapter. Normally, it should match automatically, but i happened to me once that i had to change the encryption type manually.

Another thing, your network being called netgear means that you are probably on the default settings on your router and guess what, if someone in the neighborhood also has a netgear router on default, the network will also be called netgear which could cause problems. That is also something else i'd look for.

 

Normally if locally, it's not getting a Gateway and dns server info from the router.

A Personal FireWALL can do this to you too.