The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Windows 7 64bit update to CQ60-114EM

    Discussion in 'Networking and Wireless' started by veloce1, Jul 10, 2011.

  1. veloce1

    veloce1 Newbie

    Reputations:
    0
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    5
    After wiping out the OEM Vista on my laptop I executed a clean installation of Windows 7 Professional 64bit OS onto my computer
    all is now working well enough after many file updates but I do not now have the LED's for my wireless connection button
    when wireless is off the button should show an amber light and when connected this should turn to a blue light; however there is no light at all
    occasionally when booting up the wireless button will flash amber for a second then out it goes
    I had most difficulty in establishing a wireless connection during boot up and had to manually connect the network which stayed connected until shut down and then on next boot up had to manually connect network again
    However I found an update for the Atheros AR5009 802.11a/g/n adaptor and now the network connects right at the end of the boot up sequence
    Has anyone experienced this same problem and is there a remedy for the fault ?
     
    veloce1, Jul 10, 2011
    #1