The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Rec. for router using G but good range, stable

    Discussion in 'Networking and Wireless' started by m61376, Nov 3, 2007.

  1. m61376

    m61376 Notebook Evangelist

    Reputations:
    60
    Messages:
    388
    Likes Received:
    0
    Trophy Points:
    30
    Need a rec. for a router for a friend using a laptop with an Intel G wireless card (I think the 2200). Their house is large and the modem was installed in the garage, so looking for one with particularly good signal strength.

    A couple of years ago I installed the Netgear Rangemax 834 Mimo router in my home and there was tremendous improvement in range and connectivity. Which of the current crop of routers would work similarly?

    Thanks
     
  2. Johnny T

    Johnny T Notebook Nobel Laureate

    Reputations:
    6,092
    Messages:
    12,975
    Likes Received:
    201
    Trophy Points:
    481
    hmm i have the 2200 too...and i don't like it at all :p....i recently bought linksys wireless G card with SRX which work much better :D

    ok back on topic :p if their house is that large then....why not get a signal booster as well? :) MIMO won't work with the 2200....so you won;t have the advantage of that. Also getting a high-gain antenna for the router might also be a good idea. :)
     
  3. m61376

    m61376 Notebook Evangelist

    Reputations:
    60
    Messages:
    388
    Likes Received:
    0
    Trophy Points:
    30
    I don't know if it was actually the MIMO that worked with my daughter's 2200, but I do know the Netgear Rangemax 834 MIMO router increased the signal strength and range significantly and actually was the answer for us. I could be totally mistaken, because I'm sketchy on how these things work, but my understanding is that they boost the signal strength.

    Any recommendations for a current model with strong signal strength?