The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    I need help with uPnP

    Discussion in 'Networking and Wireless' started by jsteng, Feb 20, 2012.

  1. jsteng

    jsteng Notebook Consultant

    Reputations:
    3
    Messages:
    179
    Likes Received:
    2
    Trophy Points:
    31
    I need help with uPnP.

    My main router is a DDWRT 192.168.1.1.
    My NAS is 192.168.1.2 wired to the main router.
    My TV is wired connected to a Tenda 3G150M pocket router. Tenda connects to DDWRT wirelessly with IP 192.168.1.3. TV is assigened 192.168.2.2. Tenda does not have Bridge capability unfortunately.

    My question is:
    How do I set up DDWRT and 3G150M such that uPnP packets are passed between NAS and TV. I was thinking that TV would see Tenda as the NAS through packet forwarding. Could it be done???

    I hope for your help... thanks!
     
    jsteng, Feb 20, 2012
    #1