The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Creating a bridge/AP between the router/modem and the AP device (Netgear dg834g & Zyxel 570)....help

    Discussion in 'Networking and Wireless' started by ivlgenius, Jan 17, 2009.

  1. ivlgenius

    ivlgenius Notebook Enthusiast

    Reputations:
    0
    Messages:
    41
    Likes Received:
    1
    Trophy Points:
    16
    i,

    It's 3 days since i am trying to increase my wifisignal (from 1 house to another), for this i bought a zyxel g-570 v2 device and i have a netgear DG834G v3 modem/router. I simply cannot create this connection, i don't know much about networks and i need some help here.

    - I need to setup the Zyxel device as a bridge or Access point ? Or both? (because there is this option also).

    - do i need to Enable Wireless Bridging and Repeating in the router options also ?

    - do i need to setup the same wep key and the same channel for both devices ?


    Any help would be much appreciated!

    Thanks,
     
  2. Shyster1

    Shyster1 Notebook Nobel Laureate

    Reputations:
    6,926
    Messages:
    8,178
    Likes Received:
    0
    Trophy Points:
    205
    Have you read through the setup guide and the user manual first?
     
  3. ivlgenius

    ivlgenius Notebook Enthusiast

    Reputations:
    0
    Messages:
    41
    Likes Received:
    1
    Trophy Points:
    16
    yep, but there is nothing writtin on what to do in the router settings...howerver if anyone has some quick tips, it would be better.

    Thanks,