I have a GT628 with a P8700 proc and what should be DDR3 Ram at 1066 Mhz. However both CPUz and another application, Speccy from Piriform show this:
Why only 400 Mhz. Somebody said that because it's dual channel it's actually 2x400, but that still isn't 1066 Mhz. Should i be worried?
Type DDR3
Size 4096 MBytes
Channels # Dual
DRAM Frequency 399.0 MHz
CAS# Latency (CL) 5 clocks
RAS# to CAS# Delay (tRCD) 5 clocks
RAS# Precharge (tRP) 5 clocks
Cycle Time (tRAS) 15 clocks
SPD
Number Of SPD Modules 2
Slot #1
Type DDR3
Size 2048 MBytes
Manufacturer Samsung
Max Bandwidth PC3-8500F (533 MHz)
SPD Ext. EPP
JEDEC #3
Frequency 609.5 MHz
CAS# Latency 8.0
RAS# To CAS# 8
RAS# Precharge 8
tRAS 23
tRC 31
Voltage 1.500 V
JEDEC #2
Frequency 533.3 MHz
CAS# Latency 7.0
RAS# To CAS# 7
RAS# Precharge 7
tRAS 20
tRC 27
Voltage 1.500 V
JEDEC #1
Slot #2
Type DDR3
Size 2048 MBytes
Manufacturer Samsung
Max Bandwidth PC3-8500F (533 MHz)
SPD Ext. EPP
JEDEC #3
Frequency 609.5 MHz
CAS# Latency 8.0
RAS# To CAS# 8
RAS# Precharge 8
tRAS 23
tRC 31
Voltage 1.500 V
JEDEC #2
Frequency 533.3 MHz
CAS# Latency 7.0
RAS# To CAS# 7
RAS# Precharge 7
tRAS 20
tRC 27
Voltage 1.500 V
JEDEC #1
Frequency 457.1 MHz
CAS# Latency 6.0
RAS# To CAS# 6
RAS# Precharge 6
tRAS 18
tRC 24
Voltage 1.500 V
-
moral hazard Notebook Nobel Laureate
Check your bios, it might have an option to change the frequency.
MSI might have set the frequency lower to allow headroom for overclocking with the turbo button.
Msi GT628 DDR3 Ram?
Discussion in 'MSI' started by wolt87, Jul 24, 2010.