The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Ms-16F2 (Model Name) Medion X6813 (Marketing Name) Unlocked Bios Flashing

    Discussion in 'MSI' started by HyperX, Feb 11, 2020.

  1. HyperX

    HyperX Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    1
    Trophy Points:
    6
    My Computer;
    Medion X6813 Mobile QuadCore Intel Core i7-2630QM
    In Bios;
    Marketing Name: X6813
    Model Name : Ms-16F2


    I successfully flashed bios http://forum.notebookreview.com/threads/msi-ms-16f2-barebone-bios-updates.646084/page-22 use this topic's instructions. I appreciate especially @Kingpinzero for his notes.
    1. I flashed the USB Flash Drive with Rufus program and used the Freedos, Fat32 selection.
    2. I copied the files that I used for flashing bios https://www.mediafire.com/?kn45cjlpl46th45
    3. Restart the system the USB that include the files unlocked.
    4. Firstly I backed up my Ec firmware this command, ENEF_029.exe /DUMP ECFIRMWARE
    5. Secondly I backed up my Bios this command, AFUDOS.EXE BIOS /O
    6. After that I started flashing the Bios with Uahci.bat
    7. Then I started flashing the ECFIMWARE with Ecall.bat but I'm stuck with "TARGET BOARD IS DIFFERENT!" whenever i try to flash the .422 version by using ECALL.BAT,
    8. By forcing flashing with -e -b4c switches I was able to upgrade EC as well,
    9. No problems so far from what it saw.
     
    HyperX, Feb 11, 2020
    #1
    hacktrix2006 likes this.