The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Memory RAM msi ge75 raider 10sf

    Discussion in 'MSI' started by spayk, Jul 18, 2021.

  1. spayk

    spayk Notebook Enthusiast

    Reputations:
    0
    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    15
    Hello,
    Does anyone know what is the maximum supported ram for this device?
    I mean msi site says it's max 64 GB of Ram up to 2666Mhz, but in my version I had 2x8GB of ram with 3200 MHz.
    Does anyone have original config for this msi or could tell me what Ram could be used here?
    I am thinking of getting 2x32GB of RAM, ddr4, so-dimm, from 2133/2400/2666/2800/2933/3000/3200MHz. But I am not sure of the CLI cuz I switched my RAM and do not remember the original config. Or for example 2x32 GB of RAM with 2133 MHz and 15 Cli would work?
     
  2. zipperi

    zipperi Notebook Deity

    Reputations:
    53
    Messages:
    741
    Likes Received:
    190
    Trophy Points:
    56
    MSI support: Up to DDR4-3200 Memory Type
    2 Slots Number of SO-DIMM Slot
    Max 64GB Max Capacity
     
  3. tbonephile

    tbonephile Notebook Consultant

    Reputations:
    22
    Messages:
    104
    Likes Received:
    4
    Trophy Points:
    31
    Make sure to undervolt your cpu too, you get a much bigger performance boost from that than RAM. I have a small intitialy undervolt of -125 but as I played with it and went to -300 my Cinebench R23 score went from 2350 to 2850
     
  4. NeXt3R

    NeXt3R Notebook Evangelist

    Reputations:
    72
    Messages:
    656
    Likes Received:
    109
    Trophy Points:
    56
    https://www.hwinfo.com/
    SENSOR for Cinebench ,.,.if you mean multicore score
    -300mV core/cache ?? "max -100mV from oem AC/DC Loadline" o_O - check WHEA errors
    ,.. SA/uncore -125mV ,.,.why ??? lost stability in critical situations ,,,..,i recommended positive offset ! :D "or oem // 1.05V"

    4cores "7820" - 6000 points -R23 "no limit"
     
    Last edited: Aug 1, 2021
  5. NeXt3R

    NeXt3R Notebook Evangelist

    Reputations:
    72
    Messages:
    656
    Likes Received:
    109
    Trophy Points:
    56
    3200MHZ - XMP profile "aggressive timings - 16-18-18-x"
    or for most this models exist OC TAB - here is possitible set any profile for RAM

    RAM 3200MHZ "max SPD" contains all lower profiles / no XMP "normal timings 15-15-x-x / lower frequencies"

    for best info "about XMP support" is best contact MSI directly "msi webticket"
    some bios / support is absurd -- need skill for repair /or OC

    edit ,.,. zipperi post is official spec
     
    Last edited: Aug 1, 2021
  6. tbonephile

    tbonephile Notebook Consultant

    Reputations:
    22
    Messages:
    104
    Likes Received:
    4
    Trophy Points:
    31
    -325 max core no degradation in performance (ie not enough juice) -150 cache. day to day using computer for web and email can't hear the fans
     
  7. NeXt3R

    NeXt3R Notebook Evangelist

    Reputations:
    72
    Messages:
    656
    Likes Received:
    109
    Trophy Points:
    56
    for me it looks extreme for my research ,.,but it depends on the CPU sample :)

    try HWINFO and see where the problem
    your cpu must be similar or better than my old 4 cores ;)

    temp max 90C "90-94C" maximum for most "non-K" cpu - PROCHOT
    under volt ? max -100mV / new cpu ratio limit - around power limit !! "-300mV look to much - WHEA or cpu drops - LFM"

    SA undervolt ?? no need .,,.,only lost stability on RAM in full usages

    ,.,.best way
    cpu ratio limit "around power limit" + under-volt / custom fan-curve "under 94C - max RPM"

    edit
    https://forum-en.msi.com/index.php?threads/less-processor-speed.362105/#lg=post-2054824&slide=0
    cpu zone

    similar setup for SENSOR - Cinebench R23
    if you meant a multicore score - 2-3K " look like problem" not ideal configuration / for full usage

    edit "low / normal usage"
    Park Control / BALANCED windows scheme + power slider - still adaptive performance / no noise for normal usage
    +custom fan curve - first points "same numbers" - more delay before faster spin fans
     
    Last edited: Aug 2, 2021