The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    GT60-0NE Issues, HELP!

    Discussion in 'MSI' started by Deuzsama, Sep 12, 2012.

  1. Deuzsama

    Deuzsama Newbie

    Reputations:
    0
    Messages:
    9
    Likes Received:
    0
    Trophy Points:
    5
    Good morning all!

    I recently bought a GT60-0NE and last night the computer crashed while playing GW2. I'm 99.9999% sure its a driver issue with NVIDIA (BSOD mentioned nvidia kernel).

    NOTE: I can't find any drivers for NVIDIA GTX 680M on the nvidia site.

    I've been trying to install the drivers (302 or 306) ever since and I keep getting the following messages:

    "NVIDIA Display settings are not available"

    "You are not currently using a display attached to an NVIDIA GPU"

    And if I look up the adapter in the device manager, it's either disaplyed as "Standard VGA Graphics Adapter" with the following message:

    "This device cannot find enough free resources that it can use. (Code 12)"
    "If you want to use this device, you will need to disable one of the other devices on this system"

    If its listed as NVDIA GTX 680M, it'll display:
    "Windows has stopped this device because it has reported problems"

    Any help would be appreciated. I reinstalled windows because I modified my RAID0 setup, so maybe I installed the drivers improperly, I don't know.

    Thanks in advance.
     
    Deuzsama, Sep 12, 2012
    #1
  2. Prostar Computer

    Prostar Computer Company Representative

    Reputations:
    1,257
    Messages:
    7,426
    Likes Received:
    1,016
    Trophy Points:
    331
    Contact MSI for proper driver again. I need to make sure you have the rigth driver.

    After confirming the driver is correct and re-installed but still not working, there may be an issue on your vga card.
     
    Prostar Computer, Sep 12, 2012
    #2
  3. majster msi

    majster msi Notebook Evangelist

    Reputations:
    106
    Messages:
    477
    Likes Received:
    81
    Trophy Points:
    41
    majster msi, Sep 13, 2012
    #3
  4. Deuzsama

    Deuzsama Newbie

    Reputations:
    0
    Messages:
    9
    Likes Received:
    0
    Trophy Points:
    5
    Hi guys,

    thanks for your replies.

    I installed the new drivers from nvidia.

    Still getting this message:

    This device cannot find enough free resources that it can use. (Code 12)

    If you want to use this device, you will need to disable one of the other devices on this system.

    I also checked and have E16F3IMS.10M BIOS. I tried updating but it says that it has issues with a 64bit system.

    Any ideas?
     
    Deuzsama, Sep 13, 2012
    #4
  5. -=$tR|k3r=-

    -=$tR|k3r=- Notebook Virtuoso

    Reputations:
    4,340
    Messages:
    3,583
    Likes Received:
    698
    Trophy Points:
    181
    No need to duplicate post..... read HERE!

    :)
     
    -=$tR|k3r=-, Sep 14, 2012
    #5