The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Broken key - how to fix?

    Discussion in 'LG' started by sanufi, Aug 29, 2006.

  1. sanufi

    sanufi Newbie

    Reputations:
    0
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    5
    Hi,

    A key on my LS50 notebook has broken off. I can't get it to stay on. Is there a way to fix this?

    Thanks
     
  2. Gautam

    Gautam election 2008 NBR Reviewer

    Reputations:
    1,856
    Messages:
    3,564
    Likes Received:
    0
    Trophy Points:
    105
    IF you are under warranty, send the notebook back for a replacement.

    If not, search for replacement keyboards on eBay or through a search engine, and you can replace it yourself, if you feel comfortable.

    You might, as a last resort, try gluing the key back, but I don't suggest it since you can mess up other things if you used super glue or something similar.
     
  3. Pijuvwy

    Pijuvwy Newbie

    Reputations:
    0
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    5
    I also have a broken key on my LG LS50. My kitten had his claws under the key when I pulled him off my laptop. Warranty is long gone. I don't want to buy a whole keyboard. I'll superglue as a last resort.

    BUT there appears to be a little clip which holds the key to the contack pad below, sandwiching the silicone pad between. The little clip clicks securely into the key itself, but so far I have not been able to secure it to the structures on the contact pad of the circuit board.

    Can anybody tell me what the securing method is?
     
  4. gold_duke

    gold_duke Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    If you find out that your key can not be fixed there are other alternatives to buying a new keyboard.

    You can always replace the broken key with another one on your laptop using software.

    If only one key is broken I recommend the Keyboard Remapper from EasyToUseTools since its free for one key.

    You can get it from here: http://www.easytousetools.com/keyboard_remapper/

    Another free tool to that is: http://www.inchwest.com/mapkeyboard.aspx

    Hope this help!

    Regards
     
  5. jimbob83

    jimbob83 Notebook Evangelist

    Reputations:
    500
    Messages:
    503
    Likes Received:
    0
    Trophy Points:
    30
    Don't use glue.

    If the retainer clip and the keycap are not broken, you can reassemble the parts onto the keyboard. Check the auctions on ebay for laptop keyboard key, you should be able to find one with a guide which shows you how. The guide doesn't have to be the exact one for your keyboard, they're all fairly similar. Basically you first attach the retainer clip to the small hooks on the keyboard and then snap the keycap onto the clip.

    I guess remapping could work as well, but if you're a touch typist that's going to be very awkward.