The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    i7 3290xm overclock

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by maro97, Oct 11, 2020.

  1. maro97

    maro97 Notebook Geek

    Reputations:
    10
    Messages:
    97
    Likes Received:
    22
    Trophy Points:
    16
    What is the highest overclock for this process? 3920xm alienware m18x r2 with one psu 330w
     
  2. maro97

    maro97 Notebook Geek

    Reputations:
    10
    Messages:
    97
    Likes Received:
    22
    Trophy Points:
    16
    single gpu gtx 980m
     
  3. mirage_bg

    mirage_bg Notebook Deity

    Reputations:
    55
    Messages:
    862
    Likes Received:
    180
    Trophy Points:
    56
    If you have a golden unit, you can pursue 4.3-4.4GHz for all cores with no additional voltage added.
     
  4. maro97

    maro97 Notebook Geek

    Reputations:
    10
    Messages:
    97
    Likes Received:
    22
    Trophy Points:
    16
    i'm already go to 4.3 hz only with a liquid metal thermal paste but i saw some people overclock 3920xm to 4.7 hz
     
  5. Raidriar

    Raidriar ლ(ಠ益ಠლ)

    Reputations:
    1,708
    Messages:
    5,820
    Likes Received:
    4,311
    Trophy Points:
    431
    you will have to overvolt significantly to try and hit 4.7ghz 4 core. increase flex to like 60 and see what happens. You better be doing it in winter outside though, you will bounce off the thermal limiter very fast even with liquid metal with all that added voltage.
     
  6. TheQuentincc

    TheQuentincc Notebook Evangelist

    Reputations:
    86
    Messages:
    683
    Likes Received:
    217
    Trophy Points:
    56
    Like on desktop it's a lottery, on a few chip you can do 5GHz at 1.3v while on some you can only do 4.3GHz at 1.3v
     
  7. maro97

    maro97 Notebook Geek

    Reputations:
    10
    Messages:
    97
    Likes Received:
    22
    Trophy Points:
    16
    how?
     
  8. senso

    senso Notebook Deity

    Reputations:
    560
    Messages:
    1,645
    Likes Received:
    788
    Trophy Points:
    131
    Luck..

    Usually its the chips that come from the middle of the wafer, but you wont be able to discover that, besides buying lots of CPUs and testing them.
     
  9. bennyg

    bennyg Notebook Virtuoso

    Reputations:
    1,567
    Messages:
    2,370
    Likes Received:
    2,375
    Trophy Points:
    181
    I had a 3920XM ES (QZBU, preproduction E0 stepping) that hit 4.7GHz without too much extra voltage on the anaemic cooling in a P170EM for short bursts, but died quickly

    I've had two 3940XMs in P370EM, they are same silicon but a bit better binned 3920XMs, both can do 4.2 all core on stock voltage <1.3V, the old one could do 4.5 at +100mV but was limited by cooling, this current one can x264 stress test at 4.6ghz at +140mV (~1,41V) all day long under the home made waterblock and DIY water cooling setup but 4.6 is just not worth it for the use it gets as my son's computer (Roblox, Terraria, and occasionally some work lol) for how much extra power it draws compared with 4.2

    Without special memory (2133mhz+) that most of the EM series Clevos don't handle well, most benches also see minimal improvement
     
    Last edited: Oct 15, 2020
  10. Papusan

    Papusan Jokebook's Sucks! Dont waste your $$$ on Filthy

    Reputations:
    42,701
    Messages:
    29,840
    Likes Received:
    59,615
    Trophy Points:
    931
    See the video...