The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    LCD replacement help!

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by Thagirion, Mar 17, 2008.

  1. Thagirion

    Thagirion Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    Ok guys, i'm new here so i apologies first if my english is bad :)
    I have a problem, i have now two laptops, first is TravelMate 2410, second is Aspire 5100(both Acer).
    In Travelmate 2410 the screen is broken, so i have buyed this Aspire 5100, because the motherboard is dead(coffee spill) and LCD is ok(tested on sisters Aspire 5100).Now here comes my problem:
    I want to replace TravelMate lcd with Aspire lcd, Travelmate lcd is N154I1 -L09, Aspire 5100 lcd is LTN154XA -L01. I have tried to connect lcd from aspire to travelmate,and when i connect with cables from Travelmate, is just white screen!but when i connect with original cables(and inverter ofcourse), monitor don't want to turn on..so i'm asking you, if this is compatible?because datacable from aspire lcd has 22 wires and the other one has 13 wires, both connectors are similarly to each other..and i don't know if inverter from Travelmate has gone bad, or they just are incompatible :confused:
    Can i somehow connect that or is this impossible?
    Please help =)
    i hope you understand me=)

    oh i forgot..on vga out is working ok!

    greets
     
    Thagirion, Mar 17, 2008
    #1
  2. Tim

    Tim Notebook Virtuoso

    Reputations:
    2,752
    Messages:
    3,141
    Likes Received:
    2
    Trophy Points:
    106
    First off welcome to the forums and don't worry your English isn't too bad. :)

    I don't know much about LCD replacement but I have a feeling that it will be impossible to do. If you are able to bring it in to a computer repair shop they might be able to give you some advice.
    Tim
     
    Tim, Mar 18, 2008
    #2
  3. K-TRON

    K-TRON Hi, I'm Jimmy Diesel ^_^

    Reputations:
    4,412
    Messages:
    8,077
    Likes Received:
    2
    Trophy Points:
    205
    K-TRON, Mar 18, 2008
    #3