The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    1.66 GHZ Duo Core?

    Discussion in 'Hardware Components and Aftermarket Upgrades' started by artless, Apr 25, 2006.

  1. artless

    artless Newbie

    Reputations:
    0
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    5
    How does an Intel Yonah 1.66 ghz duo core compare with other processors?

    I've tried searching but most of the things I've found are vague or rediculous-sounding.
     
  2. Reize

    Reize Notebook Virtuoso

    Reputations:
    347
    Messages:
    2,652
    Likes Received:
    0
    Trophy Points:
    55
    The T2300, the CPU you mentioned, is excellent for multitasking and pretty much anything you throw at it, except for, of course 64-Bit applications, but those won't be very common for a few years now.

    It's powerful, and great for the price.

    Is there anything you wanted to know about it in particular?

    Also, are you looking for a notebook? If so you could fill out the FAQ and post it in the corresponding forum.
     
  3. artless

    artless Newbie

    Reputations:
    0
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    5
    No, I'm not looking for a notebook. I ordered this and I just wanted to know how it would compare to my current 2.4 P4.
     
  4. Knifes

    Knifes Notebook Geek

    Reputations:
    3
    Messages:
    85
    Likes Received:
    0
    Trophy Points:
    15
    I believe that I read that the 1.66ghz duo core comes to about a little under the 3.0ghz w/HT regular proccessor. It doesn't have the raw power of the 3.0ghz, but with the duo core, it was meant for lots of multitasking, and thus being quite fast in itself.
     
  5. Reize

    Reize Notebook Virtuoso

    Reputations:
    347
    Messages:
    2,652
    Likes Received:
    0
    Trophy Points:
    55
    The 1.66 Core Duo will kill a 2.4 P4 in every way imaginable, really.
     
  6. RogueMonk

    RogueMonk Notebook Deity

    Reputations:
    369
    Messages:
    1,991
    Likes Received:
    0
    Trophy Points:
    55
    For sure. :D
     
  7. Knifes

    Knifes Notebook Geek

    Reputations:
    3
    Messages:
    85
    Likes Received:
    0
    Trophy Points:
    15
    I second this remark ^^
     
  8. xbox360dellxpsm140guy

    xbox360dellxpsm140guy Notebook Guru

    Reputations:
    0
    Messages:
    64
    Likes Received:
    0
    Trophy Points:
    15
    basically all processors that are coming out today are able to do just about anything you want. At the Pentium level especially... Hard drive speed and quantity of RAM is where I focus on upgrades.
     
  9. rickt

    rickt Notebook Consultant

    Reputations:
    45
    Messages:
    209
    Likes Received:
    0
    Trophy Points:
    30
    Copied from lowlymarine's notebook faq.

    1) Intel Pentium-M processor speeds:
    One often-asked question is, “Why on earth are Centrino processors so slow?” Well, they're not really. The advanced mobile-optimized architecture used in Intel's newest notebook chips, the Pentium-M and the lesser Celeron-M, allows the chip to operate much more efficiently than Pentium 4s and Celeron-Ds clock for clock. Here's a rough guide for converting Pentium-M chips to their equivalent Pentium 4 cores. Note that we're assuming that up to 4GHz non-hyperthreading Pentium 4s exist.

    Celeron-Ms:
    C-M 1.20GHz - 2.42GHz Celeron-D
    C-M 1.30GHz - 2.60GHz C-D
    C-M 1.40GHz - 2.86GHz C-D
    C-M 1.50GHz - 2.93GHz C-D

    Ultra-low voltage Pentium-Ms:
    C-M 0.9GHz ULV - 2.0GHz Celeron-D
    P-M 1.0GHz ULV - 2.0GHz Pentium 4
    P-M 1.1GHz ULV - 2.2GHz P4
    P-M 1.2GHz ULV - 2.4GHz P4

    Alviso/Sonoma Pentium-Ms:
    P-M 1.40GHz* - 2.5GHz Pentium 4
    P-M 1.50GHz - 2.8GHz Pentium 4
    P-M 1.60GHz - 3.0GHz P4
    P-M 1.73GHz - 3.2GHz P4
    P-M 1.86GHz - 3.4GHz P4
    P-M 2.00GHz - 3.6GHz P4
    P-M 2.13GHz - 3.8GHz P4
    P-M 2.26GHz - 4.0GHz P4
    *Not avaialable in an Alviso/Sonoma model; comparison uses older Banias core.

    Core Solo/Duo Pentuim-Ms:
    Core Solo 1.50GHz - 2.8GHz P4
    Core Solo 1.66GHz - 3.0GHz P4
    Core Duo 1.66GHz - 3.2GHz Pentium 4HT
    Core Duo 1.83Ghz - 3.6GHz P4HT
    Core Duo 2.00GHz - 3.8GHz P4HT
    Core Duo 2.16GHz - 4.0GHz P4HT

    Hopefully you've noticed a pattern that can be applied as the P-M series continues. These are rough equivalences only; much as there is dispute on the P4HT vs. Athlon 64 equivalences, no one is able to agree on an exact standard for converting the Pentium-M's speed to an equivalent P4.
     
  10. RogueMonk

    RogueMonk Notebook Deity

    Reputations:
    369
    Messages:
    1,991
    Likes Received:
    0
    Trophy Points:
    55
    Thanks for that.

    Where did you get that information?
     
  11. dudesdudets

    dudesdudets Notebook Deity

    Reputations:
    61
    Messages:
    782
    Likes Received:
    0
    Trophy Points:
    30
    I also posted this on a differrent topic but at least under a muliti-threaded app I use, my 1.66GHZ Core Duo with 1GB RAM and a PenD 840 with 2GB is comparable.(Core Duo out-performed Pen D but very small difference, and my XP pro is slighly more tweaked)
     
  12. rickt

    rickt Notebook Consultant

    Reputations:
    45
    Messages:
    209
    Likes Received:
    0
    Trophy Points:
    30
    Click on that link (faq) in the post. It was written by lowlymarine and is available on the top of the "Which notebook should I buy" forum. There are a few guides on there that may be of some use to you. Since you already ordered the processor though, that list might be all you're interested in.