The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    which ssd for old Fujitsu U1010

    Discussion in 'Fujitsu' started by rosco27, Jul 9, 2013.

  1. rosco27

    rosco27 Newbie

    Reputations:
    0
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    5
    Hi everyone, I have an old Fujitsu U1010, and I'd like to upgrade the original hard drive, a Toshiba MK4009GAL since it's become really slow.
    I've found two solid sate disks as possible options:
    1. KingSpec SSD 64G ZIF1.8" (KSD-ZF18.6-064MS), read/write rate: 109/59 MB/s
    2. RunCore Pro IV 1.8" ZIF PATA SSD (RCP-IV-Z1864-MC), read/write rate: 90/81 MB/s
    As the latter is much more expensive, I'm wondering if the difference of about 20 MB/s between these two is perceptible in everyday use, or maybe the Kingspec ssd is already much faster than the old hard disk, so that the extra-boost is pointless.
    Thanks for any suggestion,
    Alessandro
     
    rosco27, Jul 9, 2013
    #1