The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    N6010 Benchmarks: 333 vs 400 / Single vs Dual

    Discussion in 'Fujitsu' started by qwester, May 13, 2005.

  1. qwester

    qwester Notebook Virtuoso

    Reputations:
    366
    Messages:
    2,755
    Likes Received:
    0
    Trophy Points:
    55
    In the spirit of testing everything I can get my hands on, here are my results on different memory speeds and configs.

    Hardware:
    - 2 x 256MB 333MHz Hynix (2.5 3 2 7)
    - 2 x 512MB 400MHz KingMax (2.5 4 4 8) ... no clue why they wouldn't run at better timings since they are rated for (2.5 3 3 8) [ :(]

    Results:
    [​IMG]

    [​IMG]

    I tried SiSoft Sandra. It returned the same bandwidth for dual 333 and dual 400 at around 3200MB/s. As for single channel: 333MHz: 2447MB/s & 400MHz: 2759MB/s

    As for graphics' performance change it was almost none existant.
    3D Mark 2003
    333MHz Dual: 3472
    400MHz Dual: 3486

    Conclusion:
    Not that much of an increase in performance, but since I was upgrading my total RAM anyway, the extra $15 that I had to pay for the 400MHz wasn't too bad. At least I got to test whether I can squeeze any more speed out of the N6010!
    I wish the Bios had some extra memory control features. I would have liked to try to run the 400MHz modules at 333 since at that speed they should be able to achieve 2CL.
    I expected more speed going from 333 to 400MHz. It might be chipset related or somthing ... no clue! [B)]

    -------------------------------------------------------------------------
    N6010: P4M 3.2G, 1GB Dual 400MHz, 60GB 7200RPM, ATI 9700M, 17" WXGA+
    -------------------------------------------------------------------------
     
    Last edited by a moderator: Feb 6, 2015
    qwester, May 13, 2005
    #1
  2. qwester

    qwester Notebook Virtuoso

    Reputations:
    366
    Messages:
    2,755
    Likes Received:
    0
    Trophy Points:
    55
    you can order from www.portableonce.com they will do the 7200RPM upgrade for you. Me I did the sxchange myself ... cheaper.

    I am not clear at what you are comparing with what! Please explain it to me!

    The N6010 is 533FSB because it uses a mobility P4 which don't exist at faster than 533FSB. They are way cooler compared to the regular P4s ... I run at 46C under normal usage.

    what do you mean ddr11 ?!?!

    -------------------------------------------------------------------------
    N6010: P4M 3.2G, 1GB Dual 400MHz, 60GB 7200RPM, ATI 9700M, 17" WXGA+
    -------------------------------------------------------------------------
     
    qwester, May 14, 2005
    #2
  3. Steper

    Steper Newbie

    Reputations:
    0
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    5
    <blockquote id='quote'> quote:<hr height='1' noshade id='quote'>Originally posted by Steper
     
    Last edited by a moderator: May 8, 2015
    Steper, May 14, 2005
    #3