The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Remove the four screws on the bottom backside then firmly push on the hinge covers backside , they will lift a little then open lid further and carefully work the emachines logoed cover with power button up(carefull the small ribon cable)
set on bottom lip of screen and you will see the three? screws that hold the top of the keyboard. remove them lift from back (slight wiggle should do it) there is a ribbon cable near the touch pad be gentle
Problems? See this thread at archive.org.
