1537 3450 driver on 1535

playing crysis last night ran fine for a bit then crashed because driver failed wanna install this driver version 8.512 this should work right same card has anyonne tried??

currently have 8.533

 

from where did u got the drivers?

 

Dell's web
For 1537 - last driver is 8512
Fir 1535 - last driver is 8533

We are talking about the same video card, so this drivers both will work.
Dell just has different update time for 1535 and 1537!
Most drivers from 1537 will work fine on 1535

 

well which one is newer?

 

i have played and ended crysis on the same version as u r using the problem might be not with driver version.

 

obviously 8.533 is the newer.

 

well what could it be im on vista x64 home premium installed all drivers reinstalled windows due to running crappy and all drivers again think it might be the card?

 

try Vista X 64 Ultimate with limited amount of drivers!
Modify standard Ati Driver with mobility modder.
I'm with Catalystic 8.11 without CC - Dell
Vista X 64 SP 2 - everything is fine

 

you modify the driver from ati.com or the driver from dell
dont have ultimate edition and pretty tapped for cash

 

http://game.amd.com/us-en/drivers_catalyst.aspx

With Vista, there is no longer any need to mod the Catalyst driver to install via the device manager. In fact, modding the Catalyst driver thereby voiding the WHQL signing, you more than likely will render blu-ray movie playback inoperable if you have the Optiarc blu-ray reader in your Studio...

 

i do so definitely dont wanna do that so am installing 8.12 ccc and driver and seen other dls what is hydravision? and does that apply?

 

Do you load Ati Driver directly from Device Manager?!
What about ram/gpu clock speed?
Mobility versions very often are down-clocked versions!
I'm pretty fine with unsigned driver version 8.11!
Mob Moder support 3450 perfect!
CCC will only slow-down your performance by the way!

I modify original driver from Ati's Web!

 

i do so definitely dont wanna do that so am installing 8.12 ccc and driver and seen other dls what is hydravision? and does that apply? and which driver did you find that had 5.561 cuz i only found 5.533

 

5.561 is 8.12 IMO!
5.552 is 8.11 in my case!
Again CCC will only slow-down your performance - by it is individual choose!

 

bigdarkmad had to do it your way no other way worked now have 5.561 windows score is at 3.9 what is yours at

 

i would like to add some info that when u install the modded drivers(modded by mobility modded)these drivers reduce everything to half like memory bandwith,pixel fil rate,texture fil rate,core as well as memory clock also. checked by running gpu-z . so when everything becomes half the performance automatically goes down.

 

Can't say as I've never had to mod since the Vista ATI Catalyst installs just fine via device manager but above is GPU-Z with WHQL signed 8.12 driver on Studio 1735 Vista x64...

 

OMG ARE YOU SURE!
ATI PowerPlay (BIOS)
State #1 GPU: 500 MHz, Memory: 500 MHz (Boot)
State #2 GPU: 500 MHz, Memory: 500 MHz
State #3 GPU: 300 MHz, Memory: 405 MHz
State #4 GPU: 550 MHz, Memory: 500 MHz (UVD)
State #5 GPU: 500 MHz, Memory: 500 MHz
State #6 GPU: 300 MHz, Memory: 405 MHz
State #7 GPU: 110 MHz, Memory: 252 MHz (Thermal)

Dell limited HD 3450 to only 500/500!And I reached 500/500 in some games like NFS UnderCover with Modified Ati HD 3450 Driver!
In normal mode the card stays close around State #7 110/252!
Now:
GPU Clock 110 MHz (original: 500 MHz)
Real Clock 252 MHz (DDR) (original: 500 MHz)

GPU-Z will show you the same result in normal (110/252) and in game mode (500/500)!
I have the same result with original driver from Dell's Web!

I'm sorry but your post is piece of non-sense!

somms: I tested your method! May be it is just me, but when I manually load 8.12 the colors were somehow more cold!
So i uninstall all and put back my modified 8.11

 

so according to you the decrease in the memory bandwith,memory clock,gpu clock,etc on installing modded drivers is there only during normal work and it reaches back to its best possible level when we play games???plz tell as i am new with this software.is this gpu-z information wrong when above mentioned fields reduces to half????and u can also see from the picture posted by soms that his each field is half of its original value...

 

Yes.Only during normal work.And Yes it is pretty normal.
You can try it on your own.
Run Everest Ultimate.Go info:
Display -> GPU
GPU Clock 110 MHz (original: 500 MHz)
Real Clock 252 MHz (DDR) (original: 500 MHz)

After just try to run some HD Movie or someting other!
Next with HD movies (someting) minimize, jump back to Everest and check GPU/REAL(memory) clock!
And it makes sense - you don't need your video card on maximum performance all the time.Just thing about its temperature in this case!


Mkelliny: Today with 8.11 I got "4" "Video" Score!I guess it can vary depend on your system activity!

 

review by lotta221211:
http://forum.notebookreview.com/showthread.php?t=293042
and
http://farm4.static.flickr.com/3239/2809429279_37dd801ee2_o.jpg
(please note CPU, HDD and ram score can vary)

For example lotta has:
Intel Core 2 Duo T8100
4GB Shared Dual Channel DDR2
ATI Mobility Radeon HD 3450
320GB SATA Hard Drive (5400RPM)


I have:
T5750 2 Ghz
3 GB DUAL CHANNEL DDR2
250 GB SATA HARD DRIVER (5400RPM)