Let say I'm using Verizon DSL router and I believe is 802.11g
if I have 2 macbook with 802.11n and they are under the same network
1) when I xfer files, are they sending with the n speed or just the g speed?
I also have couple of other PC's and would like to upgrade to n speed as well
2) would it matter what kind of n receiver I get to get to top speed? or just matter on the n router since I heard is multi radios?
I was thinking to get an Airport Express if the dsl router only able to xfer with g speed.
3) Does the AE sufficient to get to the top speed of 300mbps of xferring?
thanks in advance,
soda
-
saturnotaku Notebook Nobel Laureate
In order to use wireless N, your router has to support it. If your existing one is g, you'll need to buy a new one. The AEBS is, IMO, a waste of money. There are plenty of good N routers available for much less money.
-
Which n router would give the best speed in short range?
Does macbook air n draft support Intensi-fi or dual band (2.4 and 5.0 Ghz)?
Thanks in advance,
soda -
airport extreme is better since you can plug in storage devices and share data through it
-
I'm looking at NETGEAR RangeMax Dual Band Wireless-N Router WNDR3300
and it only supports 10/100 wired ports
Some review says that it can go as fast as 225 mbps in closer range
but with 100 mbps port connected to the DSL modem
would that be a bottleneck and could only go up to 100 mbps in transfer rate?
thanks in advance,
soda -
blue68f100 Notebook Virtuoso
Read the review on smallnetbuilder.com The Linksys 600 test better than the Netgear. They test the speeds based on SNR. Looking at the graph will give you an idea as what speeds you may get. Any 11g router will cover you ISP speed. You could setup an adhoc network configuration that would allow pc to pc by passing the router.
Quick questions on wireless N settings
Discussion in 'Apple and Mac OS X' started by soda97, Jun 26, 2008.