I want to remove my GPU to repaste with MX4 since it worked so well on my CPU,but when I was taking the CPU out I cracked the little plastic vent on the left corner. Now the vent by the GPU is very hard to remove,I don't want to crack this one too. Do I have to take the front cover off where the alienhead start button is to access more screws in there so as not to break the vent? Thanks!
-
The Revelator Notebook Prophet
Yes, you need to remove the touchpad/power button panel from the front to get access to and remove two screws which hold the GPU rear vent. What you really need is Inap's guide -- Download M15x GPU.rar from Sendspace.com - send big files the easy way. Inap will walk you through the whole process.
-
Thanks Rev+rep
-
man that inap sure has alot of useful guides. i should really rep him.
-
The Revelator Notebook Prophet
Indeed you should. And permit me. +Rep for the Guides.
-
Hey inap your guide to upgrading the GPU was very helpful and I send my thanks +rep. Now if I only could figure how to make TS work on my cpu I might just get over 20000 on 3DMark
-
well the cooler you can get the chip the better it will perform. with a high tpd and multi without proper cooling may trigger the cpu to throttle because of high temps.
-
Who's Inap?
removing the GPU
Discussion in 'Alienware M15x' started by usmc362, May 14, 2011.