So i got my R2 in last week, and figured might as well try and see how it overclocks and have run into some issues.
CPU-Z doesn't work
- The loading bar gets stuck at the graphics section and doesn't go any further.
- I hear other people have similar issues
HWMonitor does not detect anything
- No biggie I use RealTemp 3.4 which works fine, Realtemp also tells me my current fsb and multiplier so it's good enough
Intel Burn Test
- has anyone gotten this to work? My R2 runs it at 100% cpu utilization but drops down to 50% after a little bit and kinda stays there. Not very good for stress testing if the cpu isn't being stressed.
- I have Prime95 running right now and I haven't crashed yet (fsb 166 -> 25 min into priming) but I don't really want to leave my laptop priming for the next 8 or 12 or 24 hours (or 48 hours for you purists out there). I would prefer to be able to get intel burn test to work and save some time.
Would anyone know why the M11x has these issues with these programs?
On a side note, Realtemp claims the R2 primes at 167x8 = 1.336ghz (max temp 57degrees average 51) Under what circumstances would the turbo bring it up higher (ie x17 multi)? Or should I even bother with OC?
Thank you all in advance
BTW specs = i5 processor, 4gb, Momentus xt
-
-
cpuz and hwmonitor work 100% for me. (edit: i have an i5 too, in case it matters)
M11x R2 Overclocking tools
Discussion in 'Alienware M11x' started by RindKurotsuki, Jul 13, 2010.