Just received M11x R3 refurb today.
Computer looks to be in good shape but as usual things are not right with something
Went to Best Buy and purchased a USB flash drive 16 gb. Got home and low and behold I do not have Alienware respawn and or Dell Datasafe installed on my computer! So I can not make a hdd image.
Tried to install them both from links on this forum but system won't let me because I do not have a Windows Recovery Environment! Spent the least 2 hours of my life jacking with it and I am ready to scream.
This kind of crap makes me nuts! Now I must go for vanilla starbucks drink so I don't make a hole in my apt wall with my fist : )
Any ideas?
PS - Yes i have the separate partition that looked to have been created with a factory.wim image visible
-
I just went and bought a 30 dollar external disk drive and have already used it to reinstall Win 7
-
Yes, I just find it ridiculous they would set up a partition on the drive and fail to install the software leaving the customer no recourse other than a fresh install of Windows.
This kind of lack of attention to detail is inexcusable. -
I hear ya but i personally dont even bother with OEM type recoveries anyway.
Just do a fresh clean install with the most updated drivers. then install all your favorive programs and config your settings. then make a image with Acronis or similar software and your rock solid! -
-
Thank you!
Is there a way I could put that on my 16gb USB flash? I am looking to get a SSD drive soon : D -
Sorry, I've always done fresh installs of Windows so I'm not sure if the Dell factory image can be transferred to a usb stick and used in that manner. Hopefully someone else knows.
-
Ok thank you anyway.
Oddly enough I had the same Firewire port driver issue on this m11x R3 I have now that I did on the R1 I sent back.
Oddly enough after going into BIOS and disabling the port upon reboot it installed the driver correctly? This is after disabling the port! I don't get it.
Irritated!
Discussion in 'Alienware M11x' started by Code12er, Oct 19, 2011.