I was thinking of upgrading my 2 year old mx11 so i opened it to read what type of ram i should buy, off course the data is on the back, so without disconnecting the battery i took out one module and put it back in ( bad idea apparently ).
Now when i press start it just beeps in periods of 4 times !!!! Keyboard is lit, but nothing else is happening !!!
Can anyone tell me what to do or replace ?
Regards Thomas
-
http://forum.notebookreview.com/alienware/474064-m11x-4-error-beeps-startup-resolved.html
Not very hard to google m11x 4 beeps
Basically your ram isn't seated properly after you removed them, just take it out and place them in again make sure the locking tab is fully closed too! -
Thanks for info, but after trying a couple of times with no result i swapped the modules around and now it works !!!! Apparently when having a 1gb and a 2gb module it dosn't matter in which slot you put them!!
Now i will hurry down and buy 2 x 4gb so that it can't happen again!
Btw when i look at the corsair homepage, they claim the vengeance series ( 1600 mhz / 1866 mhz ) to " improve even on older versions of i5/i7 " but will they have any effect on a i7 640um like mine, or should i go with the standard 1333 mhz, the price diff is not much anyway ,,,
Thanks in advance -
1600mhz should have lower latency when running at 1333 (i have 1600 cl9 running at 1333 cl8). Although any benefit is negligible.
-
Might as well buy the faster RAM if possible, even if your current laptop can't use them, maybe later on down the road another laptop could, I don't think the price difference is massive between them.
Have i fried my m11x r2 by removing ram module ?
Discussion in 'Alienware M11x' started by patek5146, Jan 11, 2013.