Hello everyone,
I would like to upgrade my wi fi card on my alienware m11x r2. I read on the forums that if I am upgrading to the bigfoot killer 1102 I might need 3 antennas? I dont understand how this works. Is there anywhere stating how I can be able to install this wi fi card if it requires 3 antennas? Also, these are the wireless cards I found
bigfoot 1102 | eBay
Which one is the correct one the top one or the mini one?
Thanks.
-
1102 has two antennas
1103 has three antennas
There is only one kind of 1102, they are all the same size, etc... I bought the one that is $45, very good seller/card. If you get the 1103 (not much of reason to) then you have to add an antenna, but you should just stick with the 1102. -
so the 1102 is fairly straightforward to install right? you just unplug old wireless chip and put new one in?
-
As mentioned, 1102 has 2 antennas, 1103 has 3. The M11x (all models) only has 2 antennas in the lid assembly, so if you get the 1103 you will only be able to utilize 2 antennas unless you use a mod like this to ad an external 3rd antenna.
Yes, all you need to do is unplug the 2 antenna cables, remove the screws and pop it out. Opening the back panel gives you access to everything, just remember to disconnect your battery beforehand. -
+1, it is pretty easy to install though, just take your time with it.
Changing Wireless Card M11X R2
Discussion in 'Alienware M11x' started by ikarah, May 27, 2012.