Help needed for Alienware Sentia

one of my friend has given me his old dell alienware sentia laptop to check the problem. this laptop is about 12" and Intel Pentium M processor 1.60GHz with. I reinstalled the operating system which was Windows xp pro. this machine has luckily got it's utility cd. so i have managed to install all the drivers except

Video Controller
Video Controller (VGA Compatible).

these are under yellow exclamation mark in Device Manager.

i tried to install from the utility cd, but failure. i also don't know the Service Tag or model number (my friend couldn't remember either) as most of the levels from this machine have taken off.

Can anyone give me any clue about the Model Number of this machine. I have found a logo underneath where it says Personal Computer Model No. 223110.

i have tried to sort the driver out from google but didn't find anything.

Following is Hardware Ids
Video Controller: PCI\VEN_8086&DEV_3582&CC_0380
Video Controller (VGA Compatible): PCI\VEN_8086&DEV_3582&CC_0300

someone plz help me..............

 

The vendor ID is for Intel, and according to this lookup it's an Intel IGP, specifically an Intel 855GM (Intel Extreme Graphics 2) according to this page.

 

thanks for your reply. but where can i get the driver from? could you please give me a link?

 

When I first looked on Intel's site, I couldn't find it. A bit more looking turned up this: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=10103&ProdId=939&lang=eng

Edit: And here's the self installing one: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=10099&ProdId=922&lang=eng

Sorry, didn't notice I linked the .zip version.

 

Thanks a ton. it works like a charm.

 

As i was struggling to install VGA Driver i installed something call USB20 driver for winME, i thought it was for card reader driver. the installation was fail though. but since then whenever i start the laptop i got notification "Install Program for Windows 2000 Drivers" it wants me to send error report to microsoft. i have sent couple of times, but still getting this annoying popup in my stratup. how can i get rid of this??????


Error signature
AppName: nousb20.exe AppVer: 5.1.2600.0 ModName:nousb20.exe
ModVer: 5.1.2600.0 Offset: 00001a2d

 

Problem sorted out...i have disabled something called ASCI from the start up, now i can't see that pop up anymore.

 

The Sentia models were made by Uniwill. Drivers for your version (223ii0) are here. Use the drivers from Uniwill, but do not use the BIOS from this site...the AW bios is different to support the lights on the lid.