i run my 2960xm at 45x multiplier aka 4500mhz and it works FINE, but after a day or 2, sometimes more, it refuses to clock up beyond 39x multiplier until I restart the computer, its really annoying, anyone ever ran into something like this? after restart works fine again
-
Are you launching with Throttlestop by any chance?
-
no
-
Spartan@HIDevolution Company Representative
offtopic but can you please post a screenshot of your overclock settings both of the BIOS and XTU? surprising how you can go so high with a 2960MX CPU I cannot even get a 4.2GHz stable with my 4940MX. When I say stable, I mean it has to pass the wPRIME Stability test using all threads (8). Not just be able to use the system in Windows, I mean under extreme load situations
Last edited: Apr 20, 2015TBoneSan likes this. -
Meaker@Sager Company Representative
The two are quite different architectures, the Sandy bridge chips did tend to clock very well but of course at 4.2ghz you are out performing his 4.5ghz sandy.
-
Spartan@HIDevolution Company Representative
but how can a Hotwell CPU outperform a Sandy Bridge at a lower clock? -
Meaker@Sager Company Representative
Because it has a higher IPC (instructions per clock) and goes back to the whole MHz is not everything.
Spartan@HIDevolution likes this. -
Spartan@HIDevolution Company Representative
-
Meaker@Sager Company Representative
No problem, Intel tends to be adding 5% IPC each generation at the moment.
Mr. Fox and Spartan@HIDevolution like this. -
TomJGX, Papusan and Spartan@HIDevolution like this. -
just a quick correction its 40x multiplier that it gets stuck on, like clockwork after about 1 or 2 days at most
running games it has no problems staying at 45x multiplier on all 4 cores the whole time, im not quite sure what is the reason for this but i have an SSD so restart doesn't take too long but it's simply ANNOYING -
Meaker@Sager Company Representative
Could be a firmware bug, what bios version are you running?
CPU refuses to clock up after about 1-2 days, NOT temperature
Discussion in 'Alienware 18 and M18x' started by anarky321, Apr 19, 2015.